ECE board markers for marking of oversized vehicles
The rectangular red/white striped board markers are used for front and rear marking of the over-width of implements mounted on agricultural vehicles (e.g. tractors, combine harvesters, other harvesting machines) and thus ensure more safety in agricultural road traffic.
The Blaser Visio markers comply with the ECE R104 regulations for oversize/overwidth marking.
- V303 DORA-TT-ECE-LED-PLUGGABLE marker boards for over-width marking
- V304 DORA-TT-ECE-PARA-FIX marker boards for over-width marking
- V314 DOBLI-TT-DYN-PLUGGABLE marker boards with dynamic lights incl. swivel bracket for over-width marking
- V404 HECK-TT-DYN-PLUGGABLE marker boards with dynamic lights for rear-mounted equipment
- Accessories, spare parts and other products
V303 DORA-TT-ECE-LED-PLUGGABLE marker boards for over-width marking
Over-width marking
- For easy mounting on all vehicles
- Supplied as a set, consists of 2 telescopic holders, 2 panels 282×282 mm red/white R3 reflective, 2 marker lights (red at the back / white at the front), spiral cable and sockets.
- Retractable, 270° (latching at 90°)
- Removable with Blaser plug-in console
- Telescopic 45-75cm
Accessories
- Mounting plate for mounting on cabin posts (vertical surfaces)
- Mounting plate for mounting on cabin posts (vertical surfaces)
- Tilt and swivel angle (inclined surfaces)
- Additional plug-in brackets for multiple use
| Article no. | Number | Description |
| 954.V303.LED | 1 set | OVERWIDTH MARKER V303 DORA-TT-ECE-LED-PLUGGABLE |
V304 DORA-TT-ECE-PARA-FIX marker boards for over-width marking
Overwidth/Double Wheel Marking.
- For easy mounting on all vehicles
- Supplied as a set, consists of 2 telescopic holders, 2 panels 282×282 mm red/white R3 reflective, 2 marker lights (red at the back / white at the front), spiral cable and sockets.
- Retractable, 270° (latching at 90°)
- Fixed mounted with 4xM6
- Telescopic 45-75cm
- Connection with Aspöck 2P flat cable clips
Accessories
- Mounting plate for mounting on cabin posts (vertical surfaces)
- Mounting plate for mounting on cabin posts (vertical surfaces)
- Tilt and swivel angle (inclined surfaces)
- Additional plug-in brackets for multiple use
| Article no. | Number | Description |
| 954.P304.LED | 1 set | OVERWIDTH MARKER V304 DORA-TT-ECE-LED-FIX |
V314 DOBLI-TT-DYN-PLUGGABLE marker boards with dynamic lights incl. swivel bracket for over-width marking
Overwidth marker with dynamic lights
- For easy mounting on all rear-mounted implements
- Supplied as a set, consists of 2 telescopic holders, 2 panels 282×282 mm red/white R3 reflective, 2 brake, position, indicator and clearance lights (red yellow rear / white front), spiral cable and sockets.
- Retractable, 270° (latching at 90°)
- Fixed mounted with 4xM6
- Telescopic 45-75cm
- Connection with 7-pin plug, 7m long
Accessories
- Mounting plate for mounting on cabin posts (vertical surfaces)
- Mounting plate for mounting on cabin posts (vertical surfaces)
- Tilt and swivel angle (inclined surfaces)
- Additional plug-in brackets for multiple use
| Article no. | Number | Description |
| 954.V314.DYN | 1 set | OVERWIDTH MARKER V314 HECK-TT-DYN-PLUGGABLE |
V404 HECK-TT-DYN-PLUGGABLE marker boards with dynamic lights for rear-mounted equipment
Overwidth marker with dynamic lights for rear-mounted implements
- Easy mounting on all rear implements
- Supplied as a set consisting of 2 panels 282×282 mm red/white R3 reflective, 2 brake, position, and indicator lights (red / yellow rear / none front).
- Fixed mounted on the back wall
- Connection with 7-pin plug, 7m long
| Article no. | Number | Description |
| 954.V404.DYN | 1 set | OVERWIDTH MARKER V404 REAR T-DYN PLUGGABLE |
Accessories, spare parts and other products
Mounting plate MOPL PAAR ZNGB
Mounting bracket MOWI PAAR ZNGB
Console lower part SCHUT-4L blank
Console lower part SCHUT-4L black
Pendant light LED red/white left
Pendant light LED red/white left
Rasterelement KPL. VISIO V300
Markierungstafel DORA-TT-WBC beidseitig rot/weis, reflektierend, 400 x 165 x 2 mm, Alu
Markierungstafel DORA-TP-WBC, beidseitig rot/weiss, reflektierend, 230 X 165 X 2 mm, Alu
Markierungstafel DORA-TT-WBC beidseitig rot/weiss, reflektierend, 280 X 165 X 2 mm, Alu
Markierungstafel DORA-TT-ECE, beidseitig rot/weiss R3 reflektierend, 282 X 282 mm Alu
992.STPL.017
Steckplatte zu Visio-Quick Konsole, Chromstahl 4 mm mit Sicherungsschraube gegen Herausfallen
Kipp- und Schwenkwinkel (schräge Flächen). Bild ist mit montiertem Visio-Quick Konsolen-Unterteil (SCHUT-4L 201.V202.531). Dieses muss separat bestellt werden und ist nicht im Lieferumfang verfügbar.
