Mirrors for tractors, V mirrors, side-view mirrors & mirror brackets for agricultural vehicles
The BlaserVisio side-view mirrors and telescopic mirrors for tractors and transporters ensure safety in agricultural road traffic and are well established in the Swiss agricultural market.
Advantages
- Complete systems from a single source
- High quality
- Spare parts quickly and easily available
- Universal quick-change, swivel-foot and clamp systems
- Extensive range of accessories
- Suitable for all vehicles and implements
- Easy mounting with Visio-Quick and Visio-Clip quick-change system
- Proven service from Blaser
Table of contents
- DIABLO V104 – mirrors for front mounted implements
- PARA P105 – V-mirror system for front mounted implements
- JUMBO V203 – telescopic mirror brackets for tractors
- TRAPO V252 – telescopic mirror for vans
- ZOOM V210 & V215 – mirror systems for retrofitting to tractors
- Accessories and spare parts
DIABLO V104 – mirrors for front mounted implements
Mirror shatterproof
| Item no. | Model | Image | Description |
| 951.V104.G32 | V-MIRROR SYSTEM V104 DIABLO UG320 GLASS | A | 1 bracket V104, 2 glass main mirrors |
| 951.V104.506 | V-MIRROR SYSTEM V104 DIABLO PROFI BRUSI | B | 1 bracket V104, 2 shatterproof main mirrors |
| 951.V104.700 | V-MIRROR SYSTEM V104 DIABLO PANO BRUSI | C | 1 bracket V104, 2 shatterproof panoramic mirrors |
The BlaserVisio V104 DIABLO V-mirror system can be used universally for all front mounted implements.
The two side view mirrors are VTS compliant with >500 cm2 reflective surface each and are available with glass mirrors as well as shatterproof mirrors.
The V104 mirror mount is height-adjustable, rotatable and removable. It can be mounted on all front mounted implements using the VisioQuick console. It is also used to hold the Blaser QVK cross-traffic camera systems.
On tractors with a front overhang, the V104 DIABLO V-mirror system ensures safety when turning into the road and provides a clear view of cross-traffic approaching from the left and right.
PARA P105 – V-mirror system for front mounted implements
| Item no. | Model | Description |
| 951.P105.G32 | V-MIRROR SYSTEM P105 PARA GLASS SWIVEL BASE | 1 bracket P105, 2 glass main mirrors UG320 |
| 951.P105.M32 | V-MIRROR SYSTEM P105 PARA BRUSI SWIVEL BASE | 1 bracket P105, 2 shatterproof main mirrors UM320 |
| 951.P105.M05 | V-MIRROR SYSTEM P105 PARA BRUSI PANORAMA SF | 1 bracket P105, 2 shatterproof panorama mirrors UM005 |
The BlaserVisio P105 PARA V-mirror system is universal, very flexible and can be used for all front mounted implements.
The two side view mirrors are VTS-compliant with > 500 cm2 reflective surface each and are available in glass mirror and shatterproof (BRUSI) versions.
The P105 mirror mount is height-adjustable, rotatable, tiltable and swivellable. It can be mounted on all-sided inclined surfaces using the VisioFoot swivel foot. It is also used to accommodate the Blaser QVK cross-traffic camera systems.
The P105 PARA V mirror system, on tractors with front-mounted implements, provides safety when merging and a clear view of cross-traffic approaching from the left and right.
Mounting the V-mirror system P105 PARA
Technical data
1. Mounting the swivel foot on the front implement
- Find a suitable base surface
- Mark the hole pattern, cut 4 x M8 threads or drill 4 x holes for through bolts.
- Screw the swivel foot, align the outer tube vertically and tighten all screws.
2. Fitting the mirror to the yoke
- Push the yoke into the outer tube, align the yoke 90° to the direction of movement and tighten the yoke and mirror clamps.
3. Final check
- The two mirrors must be mounted “lying down” and in full view.
- Align the mirrors, from the driver’s point of view, with the cross traffic.
JUMBO V203 & V250 – telescopic mirror brackets for tractors
| Item no. | Model | Description |
| 250.V203.418 | Mirror bracket JUMBO WBC V203 D18 L400 PUSZ | With rod D18 x 400 mm, for main and wide-angle mirrors |
| 250.V203.518 | Mirror bracket JUMBO WBC V203 D18 L300 PUSZ | With rod D18 x 300 mm standard for main mirror |
Clear view to the rear even with a trailer
- Jumbo bracket for mounting on cabin posts
- Bracket with VisioQuick quick-change system
- Bracket telescopic 42-72 cm with “anti-loss” device
- Bracket can be used “hanging” or “upright”
New! Also with rod D18 x 400 mm “long” for main and wide-angle mirrors. Complete double mirror systems can be found in the BlaserVisio Zoom range.
ZOOM V210 & V215 – mirror systems for retrofitting to tractors
| Item no. | Model | Picture | Description |
| 951.V215.TW2 | MIRROR SYSTEM ZOOM V215-SZ D14-22 TOWI, radius of curvature 200 | A | 1 clamp V215 black, 1 mirror TOWISPICK |
| 951.V215.MD3 | MIRROR SYSTEM ZOOM V215-SZ D14-22 MIDI, radius of curvature 300 | B | 1 clamp V215 black, 1 mirror UTR U7384 |
| 951.V210.TW2 | MIRROR SYSTEM ZOOM V210-IX D16-28 TOWI, radius of curvature 200 | C | 1 clamp V210 INOX, 1 mirror TOWISPICK |
The additional mirror system BlaserVisio ZOOM offers a deep insight into danger zones or “blind spots” that are not directly visible.
TowiSpick opens up an additional field of vision with its extremely strong glass curvature (200) and its round shape.
The BlaserVisio ZOOM auxiliary mirror system offers:
- Safety at acute angles
- Total overview in the close-up area (danger zone)
- View of the complete rear wheel and of overtaking vehicles
Visio-Clip
The ZOOM mirror systems can be mounted on any existing support bar with the clever Visio-Clip clamping system.
TRAPO V252 – telescopic mirror for vans
| Item no. | Qty | Model |
| 250.V252.518 | 1 pc | TELESCOPIC MIRROR HOLDER WBC V252/18 TRAPO with VisioQuick, removable, telescopic 30 – 50 cm |
The telescopic mirror holder TRAPO V 252 is suitable:
- For easy mounting on agricultural transporters
- For off-road vehicles with trailers
- Holder can be rotated, removed and telescoped 30-50 cm with holder bar for “hanging” or “standing” use
Accessories for telescopic mirror bracket WBC V252/18 TRAPO
- Mounting plates and angles
Accessories and spare parts
| Item no. | Qty | Picture | Description |
| 240.V203.068 | 1 pc | A | Extendable rod JUMBO D18X300 d 18 mm x 300 mm “Standard” |
| 240.V203.418 | 1 pc | A | Extendable rod JUMBO D18X400 LUNGO d 18 mm x 400 mm “LANG” |
| 210.V203.016 | 1 pc | B | Raster element WBC V203 KPL. O.SCHUT |
| 201.V202.531 | 1 pc | C | Console lower part SCHUT-4L black |
| 201.V201.SCH | 1 set | D | Screw set for console |
| 992.MOPL.001 | 1 pair | E | Mounting plate MOPL PAAR ZNGB |
| 992.MOWI.001 | 1 pair | F | Mounting angle MOWI PAAR ZNGB |
| 201.V202.131 | 1 pc | G | Console lower part SCHUT-4L bare |